Model 37 Standard Equipment Category I Hitch 1" Square Steel Axle Triple-Lip Sealed Ball Bearings Adjustable Angle of Cut - 4° or 19° 18" Cutout or Smooth Discs Model 47 Standard Equipment Category I Hitch 1" Square Steel Axle Triple-Lip Sealed Ball Bearings Adjustable Angle of Cut - 15° or 19° Extra Equipment Disc Scrapers Model 52 Standar...
The front and rear frame of the Athens 37 is constructed of angle and steel tubing, welded into a unitized assembly for strength and durability. The rear frame can be pinned in the up position to increase the weight on the front gangs for the initial pass.
Hitch
Category I Hitch is ideal for small tractors with 20 - 30 HP. The hitch is securely braced and rigidly connected to the frame.
Disc Gangs
Gangs are assembled in the factory and tightened to 750 ft. lbs. The gang frames are made from sturdy 2 x 3" steel tubing. The disc blades are made from the highest quality steel for strength and durability.
model 37 specifications
Model_37_Specifications
SPECIFICATIONS
WIDTH OF CUT
NUMBER OF DISCS
NUMBER OF BEARINGS
APPROX WEIGHT (lbs)
*APPROX HP
5' 2"
16
8
640
22
6' 3"
16
8
692
25
6' 5"
18 or 20
8
722
25
*Approximate horsepower (HP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures.
model 47 features
Model_47_Features
Hitch
Category I Hitch is ideal for small tractors with 25 - 30 HP. The hitch is securely braced and rigidly connected to the frame.
Frame Design
The frame of the Athens 47 is constructed of angle and steel tubing welded into a unitized assembly for strength and durability.
Disc Gangs
Gangs are assembled in the factory and tightened to 750 ft. lbs. The gang frames are made from rigid 2 x 3" steel tubing.
Choice of Discs
18" or 20" Cutout or Smooth Discs are offered on the Model 47. The disc blades are made from the highest quality steel for strength and durability.
Disc Spacing
Disc Blades can be spaced at 7", 9", or a combination of 9" front and 7" rear.
model 47 specifications
Model_47_Specifications
SPECIFICATIONS
WIDTH OF CUT
NUMBER OF DISCS
NUMBER OF BEARINGS
APPROX WEIGHT (lbs)
*APPROX HP
6' 3 "
16
8
692
25
6' 5 "
18 or 20
8
735
25
7' 6 "
22 or 24
8
812
30
7' 9 "
20
8
772
30
*Approximate horsepower (HP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures.
model 52 features
Model_52_Features
Main Frame
The Main Frame is constructed of ¼" thick steel tubing and ½" thick angle which is truss-braced and reinforced to resist twisting and bending. Compact design allows for easy lifting, straight pulling, and excellent maneuverability in small fields and around close obstacles.
Axles
Are made from 1.13" square cold rolled steel to insure straightness and to keep bearings and disc in alignment.
Gang Frames
Are constructed from 3 x 3 x ¼" structural steel tubing.
Flangette Ball Bearings
On the 52 are greaseable and have triple lip seals.
Angle of Cut
Adjustments can be made from 15° to 18° depending on your need for penetration and aggression.
model 52 specifications
Model_52_Specifications
SPECIFICATIONS
WIDTH OF CUT
NUMBER OF DISCS
DISC SPACING
NUMBER OF BEARINGS
APPROX WEIGHT (lbs)
*APPROX HP
FRONT
REAR
6' 6"
16
9"
9"
8
868
35-40
7' 0"
18 20
9" 7-1/2"
7-1/2" 7-1/2"
8
938
40-45
7' 11"
20
9"
9"
8
982
45-50
8' 2"
22 24
9" 7-1/2"
7-1/2" 7-1/2"
8
1021
45-55
*Approximate horsepower (HP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures.
model 55 features
Model_55_Features
Hitch
Category II Hitch is ideal for compact tractors with 45 - 60 HP. The hitch is securely braced and rigidly connected to the frame.
Frame Design
The frame of the Athens 55 is constructed of 4" steel channel and 4 x 4" steel tubing welded in a compact close-coupled design which allows for easy lifting, straight pulling, and excellent maneuverability in small fields.
Disc Gangs
Gangs are assembled in the factory and tightened to 750 ft. lbs. The Gang Fames are made from rigid 3 x 5" steel tubing.
Choice of Discs
20" or 22" Cutout or Smooth Discs are offered on the Model 55. The disc blades are made from the highest quality steel for strength and durability.
Angle of Cut
Gangs adjust without tools by removing only one pin per gang for a 13°, 17°, or 21° cutting angle.
model 55 specifications
Model_55_Specifications
SPECIFICATIONS
WIDTH OF CUT
NUMBER OF DISCS
NUMBER OF BEARINGS
APPROX WEIGHT (lbs)
*APPROX HP
6' 6 "
16
8
1,104
45
7' 0 "
18 or 20
8
1,188
45
7' 11 "
20
8
1,242
50
8' 2 "
22 or 24
8
1,321
50
9' 4 "
24, 26, or 28
8
1,456
60
*Approximate horsepower (HP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures.
model 65 features
Model_65_Features
Frame Design
The frame of the Athens 65 is constructed heavy and durable steel angle and tubing welded in a compact close-coupled design, which allows for straight pulling and excellent maneuverability in small fields.
Bearings
Strong relube QUADRASEAL ball bearings on the Model 65 mean long life and less downtime.
Choice Of Discs
22" or 24" Cutout or Smooth Discs are offered on the Model 65. The disc blades are made from the highest quality steel for strength and durability.
Versatility
The Hitch is designed to adapt to a Category II Free Link or a Category II Quick Hitch.
Angle of Cut
Disc Gangs adjust individually to a 15°, 18°, or 21° cutting angle.
model 65 specifications
Model_65_Specifications
SPECIFICATIONS
WIDTH OF CUT
NUMBER OF DISCS
NUMBER OF BEARINGS
APPROX WEIGHT (lbs)
*APPROX HP
8' 0"
20
8
1,700
70
8' 4"
22
8
1,800
75
9' 6"
24 or 26
8
2,000
85
*Approximate horsepower (HP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures.
model 66 features
Model_66_Features
Frame Design
The frame of the Athens 66 is constructed heavy and durable steel angle and tubing welded in a compact close-coupled design, which allows for straight pulling and excellent maneuverability in small fields.
Width of Cut
The Model 66 provides maximum width of cut without the tire compaction of a wheeled unit.
Choice Of Discs
20" or 22" Cutout or Smooth Discs are offered on the Model 66. The disc blades are made from the highest quality steel for strength and durability.
Versatility
The Hitch is designed to adapt to a Category II Free Link or a Category II Quick Hitch.
Angle of Cut
Disc Gangs adjust individually from 16º to 21º of cut.
model 66 specifications
Model_66_Specifications
SPECIFICATIONS
WIDTH OF CUT
NUMBER OF DISCS
NUMBER OF BEARINGS
APPROX WEIGHT (lbs)
*APPROX DBHP
10' 6 "
30 or 32
8
2,039
70
10' 9 "
28
8
2,006
70
12' 2 "
32
12
2,180
75-85
12' 11 "
36 or 40
12
2,257
80-90
13' 6 "
36
12
2,298
90-100
14' 1 "
40 or 44
12
2,387
90-100
15' 0 "
40
16
2,444
90-110
15' 3 "
44 or 48
16
2,522
90-110
*Approximate draw bar horsepower (DBHP) is only given as a guide. Extremely hard, soft, hilly, or boggy conditions will change these figures.
Frame Design
