BaumaLight MX948R
MX948R Fixed Tooth Mulcher for Excavator Starting at 12 Tons
The Baumalight MX948R Brush Mulcher has a 48” rotor and is designed for excavators starting at 12 tons. With a 70” path, the MX948R uses a fixed tooth holder and has 27 heavy duty double carbide tipped teeth (R9000) that are ideal for clearing heavy brush and trees. The MX948R comes with aggressive root rake teeth that are built into the frame. The root rake is perfect for ripping out rocks and moving logs. The unit also has a heavier duty body, built with a low-weight, high-strength AR400 steel and is equipped with replaceable body wear plates.
SOLD BY EQUIPMENT DEALERS
All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership |
|
The adjustable belt tensioner ensures the proper tension of your belts, with no extra idler wheel that could wear out. Simply loosen the bolts and raise the motor mount to tighten the belt. |
|
Save time by easily replacing the AR400 steel wear plates on the MX948R without needing to remove the rotor. |
|
OPTIONAL TWO-SPEED MOTOR
To maximize the rotor speed and torque to account for changing mulching material, the MX948R is available with a variable two-speed motor option. |
|
Our industry leading bent axis piston motors make the most use of your hydraulic flow and pressure for your brush clearing needs. |
|
To prevent pressure relief activation on the motor seal, the MX948R comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. |
|
If you are mulching and you catch some old fence wire, it can really cause damage to the unit if the wire slips over the edge of the rotor and gets wrapped around the shaft. The wire can get bunched against the bearings, causing major damage. Our wire protection kit contains a welded raised area on the end of the rotor that protects the shaft and prevents wire from getting in. |
|
The MX948R is equipped with a root rake for pushing rocks, fallen logs or other debris out of the way. |
|
All MX948R Brush Mulchers come with a free set of 6 replacement teeth. These replacement teeth can be conveniently stored in the enclosed spare tool compartment. |
|
Reduce your regular maintenance time by easily greasing the bearings on the MX948R from outside the frame. No tools required. |
|
The relief valve protects the motor and the hydraulic system from pressure spikes. When an obstacle is hit the relief valves open and relieves the pressure. |
|
A heavy duty reinforced belt delivers the force from the gear box to the rotor. This offers protection from the shocks inherent in mulching. |
|
For your convenience Baumalight has Developed a PSI Flow and Pressure database with over 1000 different carrier models to help you decide the best Baumalight model for your machine. |
|
Our powder coat finish is much tougher than conventional paint to stand up to the rigors of mulching and helps prevent rusting. |
