Teagle Tomahawk 505FSM
Tomahawk 505FSM Process short material for TMR, Cubicles, Poultry Bedding or Biomass The rear hydraulically angled slide allows constant material feed when the mill is operating in a stationary position. Output is increased up to 4 t/hr by eliminating stopping and starting of the drum/machine to load the bale. Configurations Tomahawk 404M - Suitable for 1.2m (4') diameter ba...
Overview
Tomahawk 505FSMProcess short material for TMR, Cubicles, Poultry Bedding or Biomass |
| The rear hydraulically angled slide allows constant material feed when the mill is operating in a stationary position. Output is increased up to 4 t/hr by eliminating stopping and starting of the drum/machine to load the bale. |
Configurations
Various drum extensions are available for ease of operation or to accommodate larger rectangular bales. The 404M/505M/505XLM range is suitable for dry material only, and will not cut silage as it will block the mill sieve. |
British built and backedFor your peace of mind Tomahawks are backed by an efficient after sales service from our production facility in Cornwall, England.The Tomahawk Drum models are economical, simple and robust. There are no gearboxes, with the drive to the rotor being direct from the tractor, a hydraulic motor is used to rotate the drum. Due to their simplicity and strength, customers can expect a long service life from their Tomahawk. |
Specifications
Gallery
product specifications
| Specification |
505FSM |
|
Drum Diameter |
72" |
|
Maximum Round Bale Diameter |
62" |
| Maximum Rectangular Bale Size | 48" x 48" |
| Height Overall with machine on ground | 102" |
| Width with chutes closed | 80" |
| Lower chute discharge height | 22" |
| Upper chute discharge height | 50" |
| Length Overall | 162" |
| Transport Width | 80" |
| Operating Width | 123" |
| Straw Giraffe Chute discharge height | 72" |
| Weight. | 3055 lb |
| PTO power required | 120HP |
| Straw | Short Chop |
| Feed Baled Silage | No |
| Feed Clamp Silage | No |
| Bed Cubicles / Straw Processing | Yes |
| Bed Loose Housing | No |
additional options
Trailed Chassis
Accommodates all models in the Drum Tomahawk range. Available with a choice of ring, ball or clevis hitch. Lower link beam kit also available. |
Length of material is determined by the screen. The nature of the material has some effect upon actual shredded length and some variation is likely to occur. We offer a variety of screen sizes 10, 13, 15, 18, 21, 25, 28, 36 holes and 50mm and 120mm slotted. All made from durable Hardox. |
Heavy duty, strong enough to allow you to change the angle of the machine whilst the drum is loaded. |
Only suitable for dry material. It will blow long straw up to 40' at 1000rpm. |
Quick attach A-Frame, allows quick coupling of the Tomahawk onto the tractor. |
Electric Drive
Electric motor drive options available. Contact us for more information. |
Various Drum Lengths
5' and 6' long drums are also available so a second bale can be loaded before the first is finished, to maintain a consistent feed rate and chop length. 8' long drum x 5' diameter, available only on the Tomahawk 404 - 404M - 4040. |
Hydraulic Deflector
To control delivery, available on all Giraffe Chutes. |
9' Long Drum 505XLM Model
Takes full length rectangular bales 4' x 4' or two round bales. Centre supports for strength and reliability. |
Swivel Giraffe Chute
Discharge height on 505M 3m (10') (if Tomahawk is lifted 30cm (12") above ground). Dry material only. Optional motor kit available. |
Choice of material chop length
Hydraulic Top Link
Straw Giraffe Chute
Quick Hitch A-Frame
literature
Videos
Documents
-
201906-ProductGuide-NA-web.pdf
-
202108-Drum-Brochure-US.pdf
-
Tomahawk-505FSM.pdf
-
201906-ProductGuide-NA-web.pdf
-
Tomahawk-505FSM.pdf
-
202108-Drum-Brochure-US.pdf
